jarkom part 7

Konfigurasi Static Router di Packet Tracer

berikut gambar desain jaringan yang akan di bahas

untuk pertama kalinya kita konfigurasi semua routernya, masalah ip addressnya bisa di lihat di konfigurasinya, berikut konfigurasi routernya

• konfigurasi fa 0/0 , serial 0/0/1 dan serial 0/0/0 pada router fazza_router0

Router>enable
Router#configure
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname fazza_Router0
fazza_Router0(config)#interface fastEthernet 0/0
fazza_Router0(config-if)#ip address 192.168.1.1 255.255.255.0
fazza_Router0(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
fazza_Router0(config-if)#exit
fazza_Router0(config)#interface serial 0/0/0
fazza_Router0(config-if)#ip address 10.10.10.1 255.255.255.252
fazza_Router0(config-if)#clock rate 64000
fazza_Router0(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
fazza_Router0(config-if)#exit
fazza_Router0(config)#interface serial 0/0/1
fazza_Router0(config-if)#ip address 10.10.40.2 255.255.255.252
fazza_Router0(config-if)#clock rate 64000
fazza_Router0(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to down
fazza_Router0(config-if)#exit
fazza_Router0(config)#
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
fazza_Router0(config)#ip route 192.168.2.0 255.255.255.0 10.10.10.2
fazza_Router0(config)#ip route 192.168.3.0 255.255.255.0 10.10.40.1
fazza_Router0(config)#

• konfigurasi serial 0/0/0 , serial 0/0/1 , fa 0/0 fa 0/1 pada router  fazza_router1

Router>enable
Router#configure
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname fazza_Router1
fazza_Router1(config)#interface fastEthernet 0/1
fazza_Router1(config-if)#ip address 192.168.2.1 255.255.255.0
fazza_Router1(config-if)#no shutdown
fazza_Router1(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
fazza_Router1(config-if)#exit
fazza_Router1(config)#interface serial 0/0/0
fazza_Router1(config-if)#ip address 10.10.10.2 255.255.255.252
fazza_Router1(config-if)#clock rate 64000
fazza_Router1(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
fazza_Router1(config-if)#exit
fazza_Router1(config)#i
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to u
fazza_Router1(config)#interface serial 0/0/1
fazza_Router1(config-if)#ip address 10.10.20.1 255.255.255.252
fazza_Router1(config-if)#clock rate 64000
fazza_Router1(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to down
fazza_Router1(config-if)#exit
fazza_Router1(config)#interface fastEthernet 0/0
fazza_Router1(config-if)#ip address 10.10.50.2 255.255.255.252
fazza_Router1(config-if)#no shutdown
fazza_Router1(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
fazza_Router1(config-if)#exit
fazza_Router1(config)#
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
fazza_Router1(config)#ip route 192.168.1.0 255.255.255.0 10.10.10.1
fazza_Router1(config)#ip route 192.168.3.0 255.255.255.0 10.10.50.1
fazza_Router1(config)#ip route 192.168.4.0 255.255.255.0 10.10.20.2
fazza_Router1(config)#

• konfigurasi fa 0/0 , fa 0/1, serial 0/0/0 dan serial 0/0/1 pada router fazza_router2

Router#configure
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname fazza_Router2
fazza_Router2(config)#interface fastEthernet 0/0
fazza_Router2(config-if)#ip address 10.10.50.1 255.255.255.252
fazza_Router2(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
fazza_Router2(config-if)#exit
fazza_Router2(config)#interface fastEthernet 0/1
fazza_Router2(config-if)#ip address 192.168.3.1 255.255.255.0
fazza_Router2(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
fazza_Router2(config-if)#exit
fazza_Router2(config)#interface serial 0/0/0
fazza_Router2(config-if)#ip address 10.10.30.2 255.255.255.252
fazza_Router2(config-if)#clock rate 64000
fazza_Router2(config-if)#no shutdown
fazza_Router2(config-if)#
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to upe
% Ambiguous command: "e"
fazza_Router2(config-if)#exit
fazza_Router2(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
fazza_Router2(config)#interface serial 0/0/1
fazza_Router2(config-if)#ip address 10.10.40.1 255.255.255.252
fazza_Router2(config-if)#clock rate 64000
fazza_Router2(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up
fazza_Router2(config-if)#exit
fazza_Router2(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up
fazza_Router2(config)#ip route 192.168.1.0 255.255.255.0 10.10.40.2
fazza_Router2(config)#ip route 192.168.2.0 255.255.255.0 10.10.50.2
fazza_Router2(config)#ip route 192.168.4.0 255.255.255.0 10.10.30.1
fazza_Router2(config)#

• konfigurasi fa 0/0,serial 0/0/0 dan serial 0/0/1 pada router fazza_router3

Router>enable
Router#configure
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname fazza_Router3
fazza_Router3(config)#interface fastEthernet 0/0
fazza_Router3(config-if)#ip address 192.168.4.1 255.255.255.0
fazza_Router3(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
fazza_Router3(config-if)#exit
fazza_Router3(config)#interface serial 0/0/0
fazza_Router3(config-if)#ip address 10.10.20.2 255.255.255.252
fazza_Router3(config-if)#clock rate 64000
fazza_Router3(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
fazza_Router3(config-if)#exit
fazza_Router3(config)#interface
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
% Incomplete command.
fazza_Router3(config)#interface serial 0/0/1
fazza_Router3(config-if)#ip address 10.10.30.1 255.255.255.252
fazza_Router3(config-if)#clock rate 64000
fazza_Router3(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to down
fazza_Router3(config-if)#exit
fazza_Router3(config)#
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up
fazza_Router3(config)#ip route 192.168.2.0 255.255.255.0 10.10.20.1
fazza_Router3(config)#ip route 192.168.3.0 255.255.255.0 10.10.30.2
fazza_Router3(config)#

NB : untuk perintah menetapkan ip static (atau perintah ip route ) setelah konfigurasi ip router selesai semua

selajutnya seting PC, yang pertama pada fazza_PC0 buka DOS jalankan perintah berikut

ipconfig 192.168.1.2 255.255.255.0 192.169.1.1

keterangan :

ifconfig untuk memberi ip

192.168.1.2 ip yang dimiliki PC

255.255.255.0 networkmask

192.169.1.1  gateway

berikutnya konfigurasi fazza_PC1, jalankan perintah

ipconfig 192.168.2.2 255.255.255.0 192.169.2.1

selanjutnya konfigurasi fazza_PC2, jalankan perintah

ipconfig 192.168.3.2 255.255.255.0 192.169.3.1

berikutnya konfigurasi fazza_PC3, jalankan perintah

ipconfig 192.168.4.2 255.255.255.0 192.169.4.1

berikut contoh gambar konfigurasi dan hasil tes koneksi dengan perintah ping